Rain Sensor

Rainfall sensor overview

Replacement rainfall sensor for use with Instromet weather products. These include the Atmos LT & NT, Atmos Dual, new Climatica, Climatica Dual & Plus, Executive and MetPlus. Also for the standalone rain sensor. The replacement rainfall sensor including an angled mounting bracket as well as 25 metres of cable.

Rain sensor datasheet setup & maintenance

Rainfall sensor shopping cart

Instromet Rain sensor
Rain sensor part no. 480 1000 121/01.

Rain sensor spare parts

Also available: Replacement filter kits (contains four gauze filters and eight mesh filters). Part number: 480 1000 080A

Rain sensor replacement filter kits
Rain sensor replacement filter kits Part number: 480 1000 080A.

Rain sensor mounting

The rain sensor comes with an aluminium angle bracket as standard. It is possible to mount the sensor to a vertical surface using the two holes in the bracket. If possible mount the sensor between 1 and 1.5 metres off the ground. We recommend fixing the sensor to a free standing post or convenient vertical surface where there are no obstructions to the rainfall. To mount to a mast or pole, see the mounting bracket below.

Rain sensor pole mounting bracket
Pole mounting bracket for rain sensor above. Part number: 480 1000 109.

Replacement mounting post for previous sensor part number 480 1000 040/01 (limited stock available). Part number: 480 7000 089.

Rain sensor mounting post
Rain sensor mounting post Part number: 480 7000 089.
© 2021: Instromet| KABBO Theme by: D5 Creation | Powered by: WordPress